HP Surestore Tape Library Model 6/60 SAN Solution Installation Guide - Page 48
Connecting the HP SureStore E Bridge FC 4/1 HV to the FC SAN, GBIC Protector, Connecting
View all HP Surestore Tape Library Model 6/60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Figure 2-9 Installation Fibre Channel Bridges Connecting the HP SureStore E Bridge FC 4/1 HV to the FC SAN: 1. Locate the FC port on the back of the bridge. 2. Remove the GBIC protector and push the metal latch down to lock it into place (see Figure 2-9). GBIC Protector 3. With the bridge powered-off, connect it to your FC environment using the appropriate cabling. The FC optical connectors on the bridge's GBIC are keyed. Be sure to insert the cable connectors in the proper orientation. Connecting the HP SureStore E Bridge FC 4/1 HV to a SCSI Bus: 1. Power-off your SCSI devices. 2. Connect a SCSI cable to one of the SCSI connectors on the back of the bridge. 3. Connect this cable to one of the SCSI connectors on your library. 4. Make sure the bus is terminated correctly. By default, the bridge is automatically terminated, but be sure that the device at the other end of the bus (your library) is also terminated. 5. Power-on your SCSI library. 6. After all the SCSI devices have completed the self-tests, power-on the bridge. 2-30 Chapter 2