HP Surestore Tape Library Model 6/60 SAN Solution Installation Guide - Page 55
HP-UX, Fibre Channel Software Drivers
View all HP Surestore Tape Library Model 6/60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
NOTE NOTE Installation HP-UX™ Fibre Channel Software Drivers HP-UX™ Fibre Channel Software Drivers Installing on HP-UX™ Version 11.0 If the FC host bus adapter (HBA) is installed in the system before the operating system software is loaded, the FC drivers are automatically loaded with the operating system. If this is the case, perform the following steps: If you are installing the A5158A adapter, skip steps 1 through 4. 1. Run SAM (System Administration Manager). 2. Under Kernel Configuration, select [Configurable Parameters]. 3. Set [num_tachyon_adapters] to the number of FC HBAs installed in the system. 4. Under the Actions menu, select [Process New Kernel]. If the FC HBA is installed in the system after the operating system software is loaded, perform the following steps: If you are installing the A5158A adapter, skip step 3. 1. Run SAM (System Administration Manager). 2. Under Kernel Configuration, select [Drivers]. 3. Under the List menu, select [Configurable Parameters] and set [num_tachyon_adapters] to the number of FC HBAs installed in the system. Setting the [num_tachyon_adapters] parameter is not necessary for the A5158A adapter. Chapter 2 2-37