HP Tc2100 hp server tc2100 installation sheet (English) - Page 63
Configuring the HP Server, Introduction
View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
8 Configuring the HP Server Introduction This chapter provides the setup instructions for your HP Tower Server tc2100 and is primarily concerned with how to use the HP Startup CD-ROM, (BIOS) Setup Utility, and SCSISelect Utility to configure the Server. The first few topics in this chapter provide an overview of the HP Startup CDROM and how to use its features to configure the Server. The balance of this chapter provides the necessary instructions for setting up the (BIOS) Setup Utility and the optional SCSISelect Utility used to configure the SCSI models of the HP Server tc2100. The (BIOS) Setup Utility and the SCSISelect Utility automatically detect most of the hardware devices you install, but you should verify the Server has properly recognize the options after you have installed all of the optional accessories. For more information on the overall process, refer to Chapter 1, "Setting Up the HP Server." • HP Startup CD-ROM - This CD-ROM allows you to access and copy the needed utilities and drivers to flexible diskettes, which can used to configure the Server. Some NOS drivers are copied directly to the Server from the Startup CD. • NOS Drivers - The NOS drivers are copied from the Startup CD-ROM to diskettes. Refer to the instructions in the HP Server tc2100 NOS Installation Guide. • HP DiagTools Utility - The HP DiagTools DOS utility can be run from the Startup CD-ROM by booting the Startup CD in the Server. The HP DiagTools Utility provides an easy-to-use hardware diagnostic for: o Server verification o Rapid troubleshooting • (BIOS) Setup Utility - This firmware utility is used to configure the following Server options: BIOS settings o HP Server Date and Time o Setting the HP Server's Boot Passwords o Setting Internal Device Boot Priority o Clearing Boot Passwords (CMOS) 57