HP Tc2100 hp server tc2100 installation sheet (English) - Page 66
Setup (BIOS) Utility, Accessing the Setup Utility, Menu Bar
View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 8 Configuring the HP Server Setup (BIOS) Utility The (BIOS) Setup Utility of the HP Server is used to configure items in the BIOS using the following menus: • Main • Advanced • Security • Power • Boot • Exit Accessing the Setup Utility The (BIOS) Setup Utility menu offers the choices listed above, and the corresponding items are described in the topics below. 1. Turn on the monitor and the HP Server. 2. Start the Setup Utility by pressing the [F2] key, when the following message appears on the boot screen. Press to enter SETUP Menu Bar The Setup Utility provides a menu bar with several menu selections. The menu bar choices are: • Main - Use this menu option to set the Server time, date and the following features: o Flexible Disk Drive - Enable or disable the floppy disk drive controller. o IDE Devices - Set primary master/slave, secondary master/slave relationships on IDE devices, and set the local bus IDE adapter. o Memory Shadow - Enable/disable video shadow, but the default settings are optimized for performance. Reserved for advanced users only. o Memory Cache - Enable/disable and configure cache address blocks, but the default settings are optimized for performance. Reserved for advanced users only. o Configuration of the information displayed during the boot process. 60