HP Tc2100 hp server tc2100 installation sheet (English) - Page 90

VIA Pro133T chip set with 33 MHz PCI and 133 MHz FSB - server maximum memory

Page 90 highlights

Appendix A Specifications Table A-2. HP Server Hardware Specifications Processors This HP Server supports Intel Celeron or Intel Pentium III processors (system board automatically detects processor FSB and changes accordingly): • Intel Celeron - 850 MHz and above with 100 MHz FSB and Integrated 128K L2 Cache on processor • Intel Pentium III - 1.13 GHz and above with 133MHz FSB and Integrated 512K L2 cache on processor Chipset Memory VIA Pro133T chip set with 33 MHz PCI and 133 MHz FSB speed support Supports up to three SDRAM DIMMS for a maximum total of 1.5 GB. Supported DIMM sizes and types: 128MB, 256MB, and 512 MB registered, 3.3 volts, 72 bits wide, ECC single-bit correcting, multi-bit detecting. Video Embedded ATI Rage XL chip video with 4MB SDRAM Supports up to 1600x1200, @ 65K colors. Refer to Table A-5, "Video Display Modes" for more details. SCSI SCSI model only; Single Channel Ultra-160 LVDs AHA 29160LP SCSI Adaptec board at 160 MB/s transfer rate with two 68-pin connectors IDE Embedded Enhanced-IDE 33/66/100 dual channel controller LAN Embedded Intel 82559 10/100 Fast Ethernet Controller PCI Bus Five full-length 32-bit PCI slots at 33 MHz and 5 volts (P1 slot occupied by SCSI Controller board for SCSI model) I/O Two Serial ports and one bi-directional parallel port with ECP/EPP high-speed support; PS/2 style mouse and keyboard connectors; USB support for printers, external modems, USB hubs, keyboard, and mouse, but these features are NOS dependent CD-ROM Bundled CD-ROM drive; IDE interface; 48x speed or faster 84

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107

Appendix A
Specifications
84
Table A-2. HP Server Hardware Specifications
Processors
This HP Server supports Intel Celeron or Intel Pentium III
processors (system board automatically detects processor FSB
and changes accordingly):
Intel Celeron - 850 MHz and above with 100 MHz FSB
and Integrated 128K L2 Cache on processor
Intel Pentium III - 1.13 GHz and above with 133MHz FSB
and Integrated 512K L2 cache on processor
Chipset
VIA Pro133T chip set with 33 MHz PCI and 133 MHz FSB
speed support
Memory
Supports up to three SDRAM DIMMS for a maximum total of
1.5 GB. Supported DIMM sizes and types: 128MB, 256MB,
and 512 MB registered, 3.3 volts, 72 bits wide, ECC single-bit
correcting, multi-bit detecting.
Video
Embedded ATI Rage XL chip video with 4MB SDRAM
Supports up to 1600x1200, @ 65K colors. Refer to Table A-5,
"Video Display Modes" for more details.
SCSI
SCSI model only; Single Channel Ultra-160 LVDs AHA
29160LP SCSI Adaptec board at 160 MB/s transfer rate with
two 68-pin connectors
IDE
Embedded Enhanced-IDE 33/66/100 dual channel controller
LAN
Embedded Intel 82559 10/100 Fast Ethernet Controller
PCI Bus
Five full-length 32-bit PCI slots at 33 MHz and 5 volts (P1 slot
occupied by SCSI Controller board for SCSI model)
I/O
Two Serial ports and one bi-directional parallel port with
ECP/EPP high-speed support; PS/2 style mouse and keyboard
connectors; USB support for printers, external modems, USB
hubs, keyboard, and mouse, but these features are NOS
dependent
CD-ROM
Bundled CD-ROM drive; IDE interface; 48x speed or faster