Hitachi DK23EA Specifications - Page 26
Physical Interface, 2.1 Connector
View all Hitachi DK23EA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
6.2 Physical Interface 6.2.1 Connector This device has a 2mm pitch interface connector which contains a power line. The connector location is shown in Figure 6-3. Interface cable side Drive side Table 6.1 Connector Parts List Name Signal Connector Receptacle Parts number of recommended type Molex 87259-4413 or equivalent Cable Signal Connector Plug AWG#28 or equivalent Molex 87400-5005 or equivalent 3.86 mm 2 mm K6602637 Rev.3 02.27.01 2 mm PIN1 PINS REMOVED(KEY) PIN44 PIN20 REMOVED(KEY) Figure 6-3 Connector Location - 26 -
K6602637
Rev.3
02.27.01
- 26 -
6.2 Physical Interface
6.2.1 Connector
This device has a 2mm pitch interface connector which contains a power line. The connector
location is shown in Figure 6-3.
Table 6.1
Connector Parts List
Name
Parts number of recommended type
Interface cable side
Signal Connector
Receptacle
Molex 87259-4413 or equivalent
Cable
AWG#28 or equivalent
Drive side
Signal Connector
Plug
Molex 87400-5005 or equivalent
Figure 6-3
Connector Location
2 mm
PIN44
PIN20 REMOVED(KEY)
PINS REMOVED(KEY)
PIN1
3.86 mm
2 mm