Hitachi DK23EA Specifications - Page 42
Table 6.5 Identify Device Information
View all Hitachi DK23EA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Word Table 6.5 Identify Device Information (Continued) Description 88 Ultra DMA transfer Bit 15 - 14 0 = Reserved Bit 13 0 = Ultra DMA mode 5 is selected Bit 12 0 = Ultra DMA mode 4 is selected Bit 11 0 = Ultra DMA mode 3 is selected Bit 10 0 = Ultra DMA mode 2 is selected Bit 9 0 = Ultra DMA mode 1 is selected Bit 8 0 = Ultra DMA mode 0 is selected Bit 7 - 6 0 = Reserved Bit 5 0 = Ultra DMA mode 5 and below are supported Bit 4 0 = Ultra DMA mode 4 and below are supported Bit 3 0 = Ultra DMA mode 3 and below are supported Bit 2 0 = Ultra DMA mode 2 and below are supported Bit 1 0 = Ultra DMA mode 1 and below are supported Bit 0 0 = Ultra DMA mode 0 and below are supported 89 Time required for security erase unit completion Word 89 specifies the time required for the SECURITY ERASE UNIT command to completion. If word 90 is 0000h, the time is not specified. SECURITY ERASE UNIT completion time = value x 2[minutes] 90 Time required for enhanced security erase unit completion Word 90 specifies the time required for the ENHANCED SECURITY ERASE UNIT command to completion. ENHANCED SECURITY ERASE UNIT completion time = value x 2[minutes]. If Word 90 is 0000h, the time is not specified. 91 Current advanced power management level value Word 91 contains the current Advanced Power Management level settings. 92 Master password revision code Word 92 contains the value of the Master password revision code set when the Master Password was last changed. Value (HEX.) XX3Fh 00XXh 00XXh 40XXh XXXXh K6602637 Rev.3 02.27.01 - 42 -