Hitachi DK23EA Specifications - Page 7

6.3.2 Command 35 6.3.2.1 Command Summary 35 6.3.2.2 Command BSY Timing 36 6.3.2.3 PIO Data In Commands 37 6.3.2.3.1 Identify Device [ECh] 38 6.3.2.3.2 Read Buffer [E4h] 45 6.3.2.3.3 Read Sectors [20h, 21h] 45 6.3.2.3.4 Read Long [22h, 23h] 45 6.3.2.3.5 Read Multiple [C4h] 45 6.3.2.4 PIO Data Out Commands 46 6.3.2.4.1 Write Buffer [E8h] 46 6.3.2.4.2 Write Sectors [30h, 31h] 46 6.3.2.4.3 Write Long [32h, 33h] 46 6.3.2.4.4 Write Multiple [C5h] 46 6.3.2.4.5 Format Track [50h] 47 6.3.2.5 Non-Data Commands 47 6.3.2.5.1 Initialize Device Parameters [91h] 47 6.3.2.5.2. Read Verify [40h, 41h] 48 6.3.2.5.3 Recalibrate [1Xh] 48 6.3.2.5.4 Seek [7Xh] 48 6.3.2.5.5 Set Features [EFh] 48 6.3.2.5.6 Set Multiple Mode [C6h] 49 6.3.2.5.7 Execute Device Diagnostic [90h] 49 6.3.2.5.8 Flush Cache [E7h] 50 6.3.2.6 Power Commands 51 6.3.2.6.1 Power Management 51 6.3.2.6.2 Advanced Power Management 52 6.3.2.6.3 Check Power Mode [98h, E5h] 53 6.3.2.6.4 Idle [97h, E3h] 54 6.3.2.6.5 Idle Immediate [95h, E1h] 54 6.3.2.6.6 Sleep [99h, E6h] 54 6.3.2.6.7 Standby [96h, E2h] 54 6.3.2.6.8 Standby Immediate [94h, E0h] 54 6.3.2.7 DMA Data In/Out Commands 55 6.3.2.7.1 Read DMA [C8h, C9h] 55 6.3.2.7.2 Write DMA [CAh, CBh] 55 6.3.2.8 SMART Feature 56 6.3.2.8.1 Attribute Parameters 56 6.2.7.8.2 SMART Device Error Log Reporting 57 6.2.7.8.3 SMART Operation with Management Modes 57 6.3.2.8.4 SMART Function Default Setting 57 6.3.2.8.5 SMART Enable Operations [B0h, Sub D8h] 57 6.3.2.8.6 SMART Disable Operations [B0h, Sub D9h] 58 6.3.2.8.7 SMART Return Status [B0h, Sub DAh] 59 6.3.2.8.8 SMART Enable/Disable Attribute AUTOSAVE [B0h, Sub D2h 59 6.3.2.8.9 SMART Save Attribute Values [B0h, Sub D3h] 60 6.3.2.8.10 SMART Enable/Disable Automatic Off-line [B0h, Sub DBh 61 6.3.2.8.11 SMART Execute Off-line Immediate [B0h, Sub D4h 62 K6602637 Rev.3 02.27.01 - 7 -