Hitachi DK23EA Specifications - Page 43
Device detected CBLID- below V
View all Hitachi DK23EA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Word Table 6.5 Identify Device Information (Continued) Description 93 Hardware reset result Bit 15 0 (fixed) Bit 14 1 (fixed) Bit 13 Bit 12 - 8 1 = Device detected CBLID- above ViH 0 = Device detected CBLID- below ViL Device 1 hardware reset result. Device 1 clears these bits to zero. Device 1 sets these bits as follows: Bit 12 0 = Reserved Bit 11 1 = Device 1 asserted PDIAG- Bit 10 - 9 These bits indicate how Device 1 determined the device number: 00, 11 = Reserved 01 = A jumper was used 10 = the CSEL signal was used Bit 8 1 (fixed) Bit 7 - 0 Device 0 hardware reset result. Device 1 clears these bits to zero. Device 0 sets these bits as follows: Bit 7 0 = Reserved Bit 6 1 = Device 0 responds when Device 1 is selected Bit 5 1 = Device 0 detected the assertion of DASP- Bit 4 1 = Device 0 detected the assertion of PDIAG0 Bit 3 1 = Device 0 passed diagnostic Bit 2 - 1 These bits indicate how Device 0 determined the device number: 00, 11 = Reserved 01 = A jumper was used 10 = the CSEL signal was used Bit 0 1 (fixed) 94-126 Reserved Value (HEX.) XXXXh 0000h K6602637 Rev.3 02.27.01 - 43 -