Hotpoint RGB528PENBB Owners Manual - Page 24

Installation, Instructions

Get Hotpoint RGB528PENBB - 30 Inch Gas Range PDF manuals and user guides View all Hotpoint RGB528PENBB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Installation Instructions Range IN THE COMMONWEALTH OF MASSACHUSETTS • This product must be installed by a licensed plumber or gas fitter. • When using ball-type gas shut-off valves, they shall be the T-handle type. • A flexible gas connector, when used, must not exceed 3 feet. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation of this range must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with the current Natural Gas Installation Code, CAN/CGAB149.1 or the current Propane Installation Code, CAN/CGA-B149.2, and with local codes where applicable. This range has been design-certified by CSA International according to ANSI Z21.1, latest edition and Canadian Gas Association according to CAN/CGA-I.1 latest edition. As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You will find these precautions in the Important Safety Information section in the front of this manual. Read them carefully. • IMPORTANT - Savethese instructions for local inspector's use. • IMPORTANT - Observaell governing codes and ordinances. • Note to Installer - Be sure to leave these instructions with the Consumer. • Note to Consumer - Keep these instructions for future reference. • Note - This appliance must be properly grounded. • Servicer - The electrical diagram is in an envelope attached to the back of the range. • Skill Level - Installation of this appliance requires basic mechanical skills. • Proper installation is the responsibility of the installer. • Product failure due to improper installation is not covered under the Warranty. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Installation
Instructions
Range
IN THE
COMMONWEALTH
OF
MASSACHUSETTS
•
This
product
must
be installed
by
a licensed
plumber
or gas
fitter.
•
When
using
ball-type
gas shut-off
valves,
they
shall
be the
T-handle
type.
•
A flexible
gas connector,
when
used,
must
not exceed
3 feet.
BEFORE YOU BEGIN
Read
these
instructions
completely
and
carefully.
Installation
of this
range
must
conform
with
local
codes,
or in the
absence
of local codes,
with
the
National
Fuel
Gas Code,
ANSI
Z223.1/NFPA.54,
latest
edition.
In Canada,
installation
must
conform
with
the
current
Natural
Gas Installation
Code,
CAN/CGA-
B149.1
or the
current
Propane
Installation
Code,
CAN/CGA-B149.2,
and with
local
codes
where
applicable.
This
range
has
been
design-certified
by CSA
International
according
to
ANSI
Z21.1,
latest
edition
and
Canadian
Gas Association
according
to
CAN/CGA-I.1
latest
edition.
As with
any appliance
using gas and generating
heat, there are certain
safety
precautions
you
should
follow.
You will
find these
precautions
in
the
Important
Safety
Information
section
in
the front of this manual.
Read them
carefully.
• IMPORTANT
- Save
these
instructions
for
local
inspector's
use.
• IMPORTANT
- Observe
all
governing
codes
and
ordinances.
•
Note
to
Installer
-
Be sure
to
leave
these
instructions
with
the
Consumer.
•
Note
to
Consumer
-
Keep
these
instructions
for
future
reference.
•
Note
- This
appliance
must
be properly
grounded.
•
Servicer
- The
electrical
diagram
is in an
envelope
attached
to
the
back
of the
range.
•
Skill
Level
-
Installation
of
this
appliance
requires
basic
mechanical
skills.
•
Proper
installation
is the
responsibility
of
the
installer.
•
Product
failure
due
to
improper
installation
is not
covered
under
the
Warranty.
24