IBM 8487 User Manual - Page 91
Run the Configuration/Setup Utility program, disabled by the user.
UPC - 000435687531
View all IBM 8487 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Note: See Chapter 8, "Parts listing, Type 8482 and 8487," on page 99 to determine which components are replaceable by the customer (CRU), and which components must be replaced by a field service technician (FRU). Error code/symptom FRU/action 189 (An attempt was made to access the server with invalid passwords) v Run the Configuration/Setup Utility program, and enter the administrator password. 201 1. DIMM (Memory test error.) If the server does not have the latest level of BIOS installed, 2. System board update the BIOS to the latest level and run the diagnostic program again. 289 (DIMM disabled by POST or user) 1. Run the Configuration/Setup Utility program, if the DIMM was disabled by the user. 2. Disabled DIMM, if not disabled by user. 3. System board 301 (Keyboard or keyboard controller error) 1. Keyboard 2. System board 303 (Keyboard controller error) v System board 602 (Invalid diskette boot record) 1. Diskette 2. Diskette drive 3. Cable 4. System board 604 (Diskette drive error) 1. Run the Configuration/Setup Utility program. 2. Diskette drive. 3. Cable. 4. System board. 662 (Diskette drive configuration error) 1. Run the Configuration/Setup Utility program and diagnostics. 2. Diskette drive. 3. Drive cable. 4. System board. 962 (Parallel port error) 1. Disconnect the external cable on the parallel port. 2. Run the Configuration/Setup Utility program. 3. System board. 1162 (Serial port configuration conflicts) 1. Run the Configuration/Setup Utility program and ensure that the IRQ and I/O port assignments needed by the serial port are available. 2. If all interrupts are being used by adapters, remove an adapter or force other adapters to share an interrupt. 1762 (Hard disk configuration error) 1. Hard disk drive. 2. Hard disk drive cables. 3. Run the Configuration/Setup Utility program. 4. SCSI backplane. 5. System board. 1800 1. Run the Configuration/Setup Utility program. (No more hardware interrupts available for PCI adapter) 2. Remove adapter. Chapter 7. Symptom-to-FRU index 81