IBM 8487 User Manual - Page 95
System board LEDs, For a = 0
UPC - 000435687531
View all IBM 8487 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Note: See Chapter 8, "Parts listing, Type 8482 and 8487," on page 99 to determine which components are replaceable by the customer (CRU), and which components must be replaced by a field service technician (FRU). Error code/symptom FRU/action 217-198-XXX (Could not establish drive parameters) 1. Check cable and termination. 2. Hard disk drive backplane. 3. SCSI daughter card 4. Hard disk drive. 217-XXX-00n (Failed hard disk drive test) Note: If RAID is configured, the hard disk drive number refers to the RAID logical array. 1. Hard disk drive n 2. SCSI card 3. Hard disk drive backplane 301-XXX-000 (Failed keyboard test) v Keyboard v System board 302-XXX-000 (Failed mouse test) v Mouse v System board 405-XXX-000 (Failed Ethernet test on controller on the system board) 1. Verify that Ethernet is not disabled in BIOS. 2. System board. 405-XXX-00n (Failed Ethernet test on adapter in PCI slot n) 1. For n=0, system board 2. For n>0, adapter in PCI slot n 3. System board 405-XXX-a0n 1. For a = 0, system board (Failed Ethernet test on adapter in PCI slot a) 2. For a > 0, adapter in PCI slot a 415-XXX-000 (Failed Modem test) Note: Error message may indicate modem is not supported. 1. Cable Note: Ensure modem is present and attached to server. 2. Modem 3. System board System board LEDs Note: See Chapter 8, "Parts listing, Type 8482 and 8487," on page 99 to determine which components are replaceable by the customer (CRU), and which components must be replaced by a field service technician (FRU). LED FRU/action DIMM x 1. DIMM x 2. System board Standby power 1. Power supply Note: Normal operation is indicated when this LED is lit and 2. System board the server is connected to an ac power source. A problem is indicated if the LED is not lit when connected to ac power. System fan 2 1. Fan 2 2. System board Chapter 7. Symptom-to-FRU index 85