IBM 8649 Hardware Maintenance Manual - Page 119
Hot-swap, power-supply, errors
UPC - 000435133427
View all IBM 8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Note: See "System replaceable units" on page 122 to determine which components should be replaced by a field service technician. Symptom to FRU list Symptom FRU/action Tape drive test failed. Tape drive BIOS timer test failed. System board IRQ controller test tailed. System board DMA channels test failed. System board RAM refresh test failed. System board Real-time clock test failed. System board System board LED test failed. System board Cache test failed. Microprocessor Keyboard test failed. 1. Keyboard 2. System board Speaker test failed. System board Mouse test failed. 1. Mouse 2. System board Hot-swap power-supply LED errors Use the information in this section to solve power-supply problems. Note: The minimum configuration required for the dc good light to be lit is: v Power supply v Power cage assembly, if installed. v System board (set switch 7 of SW1 to bypass the power switch; see "System-board internal connectors" on page 91. Note: See "System replaceable units" on page 122 to determine which components should be replaced by a field service technician. AC good LED DC good LED Description FRU/action Off Off No power to system or ac problem. 1. Check ac power to the system. 2. Power supply. Chapter 6. Symptom-to-FRU index 109