IBM 8649 Hardware Maintenance Manual - Page 53
Cabling, optional, adapter
UPC - 000435133427
View all IBM 8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Cabling an optional SCSI adapter You can install an optional SCSI adapter in your server to control the internal hard disk drives. With a SCSI adapter installed, you can configure the internal hard disk drives into disk arrays. You can also cable a SCSI adapter to external hard disk drives. See your SCSI adapter option documentation for complete instructions for installing a SCSI adapter in your server and for additional information about SCSI adapters. Notes: 1. This information in this section does not apply to the ServeRAID-6i controller, which uses the integrated SCSI controller with RAID capabilities on the system board. 2. An optional SCSI adapter or cable option is required to connect external SCSI devices. Complete the following steps to cable an optional SCSI adapter: 1. Install the SCSI adapter (see "Installing an adapter" on page 40). 2. Connect the SCSI signal cable to the adapter and to one or more of the signal-cable connectors to the rear of the SCSI devices. 3. Connect the SCSI-activity-indicator cable to the adapter and to the SCSI-LED connector (J18) on the system board. See "System-board internal connectors" on page 91 for the location of the SCSI-LED connector. SCSI signal cable Expansion-slot cover SCSI LED Rear adapterretaining bracket SCSI signal cable connector SCSI Adapter SCSI activity indicator cable connector Front adapter- retaining bracket SCSI activity indicator cable 4. Complete the installation of the optional SCSI adapter. Chapter 4. Installing options 43