IBM 8649 Hardware Maintenance Manual - Page 93
Front
UPC - 000435133427
View all IBM 8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Front fan Before you begin: v Read "Safety information" on page 129 v Review the information in "System reliability considerations" on page 33 To remove the front fan, complete the following steps: 1. Turn off the server, if it is on. 2. Unplug the server, and disconnect the power cord; then, disconnect all external cables. 3. Remove the side cover. See "Removing the side cover" on page 36 4. Remove the frame-support bracket. See "Removing and installing the support bracket" on page 38 5. Remove the fan cable from the system board. 6. Remove the adapter-support bracket and fan housing. 7. Use side cutters to cut the four rubber extensions on the adapter-support bracket. Chapter 5. Field replaceable units 83
Front
fan
Before
you
begin:
v
Read
“Safety
information”
on
page
129
v
Review
the
information
in
“System
reliability
considerations”
on
page
33
To
remove
the
front
fan,
complete
the
following
steps:
1.
Turn
off
the
server,
if
it
is
on.
2.
Unplug
the
server,
and
disconnect
the
power
cord;
then,
disconnect
all
external
cables.
3.
Remove
the
side
cover.
See
“Removing
the
side
cover”
on
page
36
4.
Remove
the
frame-support
bracket.
See
“Removing
and
installing
the
support
bracket”
on
page
38
5.
Remove
the
fan
cable
from
the
system
board.
6.
Remove
the
adapter-support
bracket
and
fan
housing.
7.
Use
side
cutters
to
cut
the
four
rubber
extensions
on
the
adapter-support
bracket.
Chapter
5.
Field
replaceable
units
83