IBM 8649 Hardware Maintenance Manual - Page 78
Connecting, external, options, Installing, server
UPC - 000435133427
View all IBM 8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
starts so that you can save the new configuration information. See the User's Guide on the IBM xSeries Documentation CD for more information about the Configuration/Setup Utility program. Some options have device drivers that you need to install. See the documentation that comes with your option for information about installing any required device drivers. Your server comes with one or two microprocessors installed on the system board. If your server comes with two microprocessors, or if your server comes with one microprocessor and you have installed an additional microprocessor, your server can now operate as an SMP server. Therefore, you might need to upgrade your operating system to support SMP. See the ServerGuide information in the User's Guide on the IBM xSeries Documentation CD and to your operating-system documentation for additional information. If your server has a RAID configuration using the integrated SCSI controller with RAID capabilities or has a ServeRAID controller installed and you have installed or removed a hard disk drive, see the ServeRAID documentation on the IBM ServeRAID Support CD for information about configuring your disk arrays. Connecting external options If you install an optional SCSI adapter, or use channel B on the integrated SCSI controller for external devices, you can attach external SCSI devices, such as a SCSI storage expansion enclosure, to your server. To use channel B for external SCSI devices, remove the SCSI knockout from the rear of the server and secure the free end of the channel B cable in the new opening. You can attach additional external options to the input/output (I/O) connectors on the front and rear of your server. (See "System-board option connectors" on page 91 for more information.) Complete the following steps to attach an external device: 1. Review the safety information beginning on page 129 "Installation guidelines" on page 33, and the documentation that comes with your options. 2. Turn off the server and all attached devices. 3. Follow the instructions that come with the option to prepare it for installation and to connect it to the server. Note: If you are attaching an external SCSI device, see "Ultra320 SCSI connector" on page 71 for information about SCSI cabling and SCSI IDs. Installing the server in a rack An optional Tower-to-Rack Kit is needed to convert your server from a tower model to a rack model. You can then install the server in a rack cabinet. To order a Tower-to-Rack Kit for your server, contact your IBM marketing representative or authorized reseller. 68 IBM xSeries 225 Types 8649: Hardware Maintenance Manual and Troubleshooting Guide