IBM 8649 Hardware Maintenance Manual - Page 121
Error, code/symptom, FRU/action
UPC - 000435133427
View all IBM 8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Note: See "System replaceable units" on page 122 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 162 (Device configuration error) Note: Be sure to load the default settings and any additional desired settings; then, save the configuration. 1. Run the Configuration/Setup Utility program. 2. Battery. 3. Failing device. 4. System board. 163 (Real-time clock error) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 164 (Memory configuration changed.) 1. Run the Configuration/Setup Utility program. 2. DIMM. 3. System board. 175 (EEPROM CRC #1 damaged.) System board 184 (Power-on password damaged) 1. Run the Configuration/Setup Utility program. 2. System board. 185 (Drive startup sequence information corrupted) 1. Run the Configuration/Setup Utility program. 2. System board. 187 (VPD serial number not set.) 1. Set serial number in the Configuration/Setup Utility program. 2. System board. 188 (EEPROM CRC #2 damaged.) 1. Run the Configuration/Setup Utility program. 2. System board. 189 1. Run the Configuration/Setup Utility program. (An attempt made to enter the system with invalid passwords) 2. System board. 201 (Memory test error.) 1. DIMM 2. System board 229 (Internal cache (L2) error) 1. Microprocessor 2. Optional microprocessor 289 (DIMM disabled by the user or system.) 1. Run the Configuration/Setup Utility program. 2. DIMM. 3. System board. 301 (Keyboard or keyboard controller error) 1. Keyboard 2. System board 303 (Keyboard controller error) 1. Replace the PS/2 keyboard with a USB keyboard. 2. System board. 602 (Invalid diskette boot record) 1. Diskette 2. Diskette drive 3. Drive cable 4. System board Chapter 6. Symptom-to-FRU index 111