IBM 8649 Hardware Maintenance Manual - Page 24
Setting, updating, multiple, servers, Installing, operating, system, without, ServerGuide, Using,
UPC - 000435133427
View all IBM 8649 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
checks the CD for newer device drivers. This information is stored and then passed to the operating system installation program. 3. With some operating system installations, you can create an operating system replication diskette for setting up additional servers. This diskette contains the Internet protocol (IP) address, server name, and other selections. 4. The ServerGuide program presents operating system partition options that are based on your operating system selection and the installed hard disk drives. 5. If you are installing the operating system from diskette, the ServerGuide program lists the diskettes that you must create and the optional diskettes that you might want to create. The diskettes that you can create are the device-driver diskettes for the installed adapters or controllers. 6. The ServerGuide program prompts you to insert your operating system CD and restart the server. At this point, the installation program for the operating system takes control to complete the installation. Setting up or updating multiple servers You can use the ServerGuide program to create diskettes that help you set up or update multiple servers. You can modify information on the diskettes as you use them to set up or update other servers. Note: Availability and function can vary by server model and by the hardware that is installed. You can create a setup-replication diskette, which contains your hardware configuration selections. Use this diskette to replicate selections to other servers that are of the same model. You can create a operating system replication diskette, which contains information that you need to complete multiple installations. Not all operating systems support operating system replication diskettes. Installing your operating system without ServerGuide If you have already configured the server hardware and you decide not to use the ServerGuide program to install your operating system, complete the following steps to download the latest operating system installation instructions from the IBM Support Web page: 1. Go to http://www.ibm.com/support/. 2. Under Browse, click Servers. 3. From the Family drop-down list, select your server model. 4. If operating system installation instructions are available for your server model, OS installation is in the list in the upper-left corner of the Web page. Click OS installation and select the instructions for your operating system. Using the RAID Configuration programs Use the following programs to configure and manage RAID arrays. Be sure to use these programs as described in this book: v LSI Logic Configuration Utility program Use the LSI Logic Configuration Utility program to: - Perform a low-level format on a SCSI hard disk drive - View or change SCSI IDs for attached devices - Set SCSI protocol parameters on SCSI hard disk drives 14 IBM xSeries 225 Types 8649: Hardware Maintenance Manual and Troubleshooting Guide