Home » Intel Manuals » Processors » Intel QX9770 » Manual Viewer

Intel QX9770 Design Guidelines - Page 54

Reference Attach Mechanism, Structure to Motherboard Interface

UPC - 735858197564

Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

LGA775 Socket Heatsink Loading 5.6 Reference Attach Mechanism The ALCT pump is attached to the motherboard through the use of a backside stiffener plate. Prior to motherboard installation in the chassis the backside stiffener plate is attached with two screws. Once installed these screws remain installed unless the stiffener plate requires removal. After installation of the board into the chassis the pump and upper structure are secured to the motherboard and backside stiffener with two additional screws (Figure 18). The heat exchanger is positioned on the back panel and is secured in place using four screws provided in the accessory kit. The heat exchanger can be mounted on most back panels that will accept 120 mm fans. The range of recommended positions of the heat exchanger relative to the pump is defined in Figure 74. Figure 18. Structure to Motherboard Interface 54 Thermal and Mechanical Design Guidelines

Section	Page
1 Introduction	9
1.1 Document Goals and Scope	9
1.1.1 Importance of Thermal Management	9
1.1.2 Document Goals	9
1.1.3 Document Scope	10
1.2 References	11
1.3 Definition of Terms	11
2 Processor Thermal/Mechanical Information	13
2.1 Mechanical Requirements	13
2.1.1 Processor Package	13
2.1.2 Heatsink Attach	15
2.1.2.1 General Guidelines	15
2.1.2.2 The Pump Assembly Clip Load Requirement	15
2.1.2.3 Additional Guidelines	16
2.2 Thermal Requirements	16
2.2.1 Processor Case Temperature	16
2.2.2 Thermal Profile	17
2.2.3 TCONTROL	18
2.3 Heatsink Design Considerations	19
2.3.1 Heatsink Size	20
2.3.2 Package IHS Flatness	20
2.3.3 Thermal Interface Material	21
2.4 System Thermal Solution Considerations	21
2.4.1 Chassis Thermal Design Capabilities	21
2.4.2 Improving Chassis Thermal Performance	21
2.4.3 Summary	22
2.5 System Integration Considerations	22
3 Thermal Metrology	23
3.1 Characterizing Cooling Performance Requirements	23
3.1.1 Example	25
3.2 Processor Thermal Solution Performance Assessment	26
3.3 Local Ambient Temperature Measurement Guidelines	26
3.4 Processor Case Temperature Measurement Guidelines	29
4 Thermal Management Logic and Thermal Monitor Feature	31
4.1 Processor Power Dissipation	31
4.2 Thermal Monitor Implementation	31
4.2.1 PROCHOT# Signal	32
4.2.2 Thermal Control Circuit	32
4.2.3 Thermal Monitor 2	33
4.2.4 Operation and Configuration	34
4.2.5 On-Demand Mode	35
4.2.6 System Considerations	35
4.2.7 Operating System and Application Software Considerations	36
4.2.8 THERMTRIP# Signal	36
4.2.9 Cooling System Failure Warning	36
4.2.10 Digital Thermal Sensor	37
4.2.11 Platform Environmental Control Interface (PECI)	38
5 Intel Thermal/Mechanical Reference Design Information	39
5.1 Validation Results for the ATX Reference Design	39
5.1.1 Heatsink Performance	40
5.1.2 Acoustics	40
5.1.3 Altitude	41
5.1.4 Reference Heatsink Thermal Validation	41
5.1.5 Fan Motor Performance	42
5.1.6 Pump Motor Performance	43
5.2 Environmental Reliability Testing	44
5.2.1 Structural Reliability Testing	44
5.2.1.1 Random Vibration Test Procedure	44
5.2.1.2 Shock Test Procedure	45
5.2.2 Power Cycling	46
5.2.3 Reliability Testing	46
5.2.3.1 Tubing Material Selection	48
5.2.3.2 Reservoir Sizing	48
5.2.3.3 Reliability Test Results	50
5.2.4 Recommended BIOS/CPU/Memory Test Procedures	51
5.3 Material and Recycling Requirements	52
5.4 Safety Requirements	52
5.5 Geometric Envelope for Intel Reference ATX Thermal Mechanical Design	52
5.6 Reference Attach Mechanism	54
5.7 Socket and Voltage Regulation Cooling Strategy	55
6 Intel® Quiet System Technology (Intel® QST)	57
6.1 Intel® Quiet System Technology Algorithm	57
6.1.1 Output Weighting Matrix	58
6.1.2 Proportional-Integral-Derivative (PID)	58
6.2 Board and System Implementation of Intel® Quiet System Technology	60
6.3 Intel® QST Configuration & Tuning	62