Home » Intel Manuals » Processors » Intel QX9770 » Manual Viewer

Intel QX9770 Design Guidelines - Page 57

Intel® Quiet System Technology (Intel® QST), Intel

UPC - 735858197564

Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Intel® Quiet System Technology (Intel® QST) 6 6.1 Intel® Quiet System Technology (Intel® QST) In the Intel® 965 Express Chipset Family a new control algorithm for fan speed control is being introduced. It is composed of a Manageability Engine (ME) in the Graphics Memory Controller Hub (GMCH) which executes the Intel® Quiet System Technology (Intel® QST) algorithm and the ICH8 containing the sensor bus and fan control circuits. The ME provides integrated fan speed control in lieu of the mechanisms available in a SIO or a stand-alone ASIC. The Intel QST is time based as compared to the linear or state control used by the current generation of FSC devices. A short discussion of Intel QST will follow along with thermal solution design recommendations. For a complete discussion of programming the Intel QST in the ME please consult the Intel® Quiet System Technology (Intel® QST) Configuration and Tuning Manual. Intel® Quiet System Technology Algorithm The objective of Intel QST is to minimize the system acoustics by more closely controlling the thermal sensors to the corresponding processor or chipset device TCONTROL value. This is achieved by the use of a Proportional-Integral-Derivative (PID) control algorithm and a Fan Output Weighting Matrix. The PID algorithm takes into account the difference between the current temperature and the target (TCONTROL), the rate of change and direction of change to minimize the required fan speed change. The Fan Output Weighting Matrix utilizes the effects of each fan on a thermal sensor to minimize the required fan speed changes Figure 21 shows in a very simple manner how Intel QST works. See the Intel® Quiet System Technology (Intel® QST) Configuration and Tuning Manual for a detail discussion of the inputs and response. Thermal and Mechanical Design Guidelines 57

Section	Page
1 Introduction	9
1.1 Document Goals and Scope	9
1.1.1 Importance of Thermal Management	9
1.1.2 Document Goals	9
1.1.3 Document Scope	10
1.2 References	11
1.3 Definition of Terms	11
2 Processor Thermal/Mechanical Information	13
2.1 Mechanical Requirements	13
2.1.1 Processor Package	13
2.1.2 Heatsink Attach	15
2.1.2.1 General Guidelines	15
2.1.2.2 The Pump Assembly Clip Load Requirement	15
2.1.2.3 Additional Guidelines	16
2.2 Thermal Requirements	16
2.2.1 Processor Case Temperature	16
2.2.2 Thermal Profile	17
2.2.3 TCONTROL	18
2.3 Heatsink Design Considerations	19
2.3.1 Heatsink Size	20
2.3.2 Package IHS Flatness	20
2.3.3 Thermal Interface Material	21
2.4 System Thermal Solution Considerations	21
2.4.1 Chassis Thermal Design Capabilities	21
2.4.2 Improving Chassis Thermal Performance	21
2.4.3 Summary	22
2.5 System Integration Considerations	22
3 Thermal Metrology	23
3.1 Characterizing Cooling Performance Requirements	23
3.1.1 Example	25
3.2 Processor Thermal Solution Performance Assessment	26
3.3 Local Ambient Temperature Measurement Guidelines	26
3.4 Processor Case Temperature Measurement Guidelines	29
4 Thermal Management Logic and Thermal Monitor Feature	31
4.1 Processor Power Dissipation	31
4.2 Thermal Monitor Implementation	31
4.2.1 PROCHOT# Signal	32
4.2.2 Thermal Control Circuit	32
4.2.3 Thermal Monitor 2	33
4.2.4 Operation and Configuration	34
4.2.5 On-Demand Mode	35
4.2.6 System Considerations	35
4.2.7 Operating System and Application Software Considerations	36
4.2.8 THERMTRIP# Signal	36
4.2.9 Cooling System Failure Warning	36
4.2.10 Digital Thermal Sensor	37
4.2.11 Platform Environmental Control Interface (PECI)	38
5 Intel Thermal/Mechanical Reference Design Information	39
5.1 Validation Results for the ATX Reference Design	39
5.1.1 Heatsink Performance	40
5.1.2 Acoustics	40
5.1.3 Altitude	41
5.1.4 Reference Heatsink Thermal Validation	41
5.1.5 Fan Motor Performance	42
5.1.6 Pump Motor Performance	43
5.2 Environmental Reliability Testing	44
5.2.1 Structural Reliability Testing	44
5.2.1.1 Random Vibration Test Procedure	44
5.2.1.2 Shock Test Procedure	45
5.2.2 Power Cycling	46
5.2.3 Reliability Testing	46
5.2.3.1 Tubing Material Selection	48
5.2.3.2 Reservoir Sizing	48
5.2.3.3 Reliability Test Results	50
5.2.4 Recommended BIOS/CPU/Memory Test Procedures	51
5.3 Material and Recycling Requirements	52
5.4 Safety Requirements	52
5.5 Geometric Envelope for Intel Reference ATX Thermal Mechanical Design	52
5.6 Reference Attach Mechanism	54
5.7 Socket and Voltage Regulation Cooling Strategy	55
6 Intel® Quiet System Technology (Intel® QST)	57
6.1 Intel® Quiet System Technology Algorithm	57
6.1.1 Output Weighting Matrix	58
6.1.2 Proportional-Integral-Derivative (PID)	58
6.2 Board and System Implementation of Intel® Quiet System Technology	60
6.3 Intel® QST Configuration & Tuning	62