Intel SC5600BASE Service Guide - Page 26
Standard and Optional Hot-swap Drive Bays, Intel, Remote Management Module 3, Rack-mount Systems
View all Intel SC5600BASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Server Chassis Features Standard and Optional Hot-swap Drive Bays One bay supporting six cabled drives ships with the standard chassis. Optional hot-swap drive bays may replace the 6-drive fixed drive bay. An optional 4-drive fixed drive bay (for cabled drives) is available. No tools are required to replace the fixed drive bays. Optional 4-drive and 6-drive SAS/SATA are available. For instructions on installing hard drives, see "Removing and Installing Hot Swap Drive(s)" on page 55. / NOTE Drives can consume up to 17 W or higher of power each. Drives must be specified to run a maximum ambient temperature of 45° Celsius. The Intel® Server Chassis SC5600 does not support all SAS/SATA hard drives. See "Additional Information and Software" on page vii for an Internal link to a list of supported hardware. See "Drive Cage Upgrade Kit Installation Guide: Intel® Server Chassis SC5400 and SC5600" for installing hotswap hard drive bays. Intel® Remote Management Module 3 The Intel® Remote Management Module 3 (Intel® RMM3) plugs into the connector on the server board and acts as a component of the server board, and provides a way to view and operate the server remotely in realtime. Keyboard, video, and mouse control (KVM) is redirected to a managing system. This provides remote control. USB media redirection allows you to use a USB device anywhere on the network as if it was installed on the management server with RMM3 installed. For example, you can insert a CD-ROM disk in a workstation CD-ROM drive and the managed server will view it as its own, local CD-ROM drive. For installation instructions on installing the Intel® Remote Management Module 3, see the instructions provided with the module. Rack-mount Systems You can mount your Intel® Server chassis SC5600 into a rack. Intel provides a tool-less rail kit and a cable management arm to mount this server chassis into a rack. When installing the chassis into a rack, Intel recommends you install systems from the bottom of the rack to the top. In other words, install the first system in the rack into the bottom position of the rack; the second system in the second position from the bottom; and so on. Instructions for installing your chassis into a rack are included in the rail kit. The order numbers are as follows: Order Code ARIGRACK AXXCMA3U7U ARIGRACKCVR Description Pedestal to rack conversion kit for Intel® Server Chassis SC5600. Universal 3U through 7U Rack Mode Cable Management Arm (CMA). Requires ARIGRACK. Optional unpainted removable side (top) cover for Intel® Server Chassis SC5600. If unpainted top cover is needed, you can use in rack conversion mode. 12 Intel® Server Chassis SC5600 Service Guide