Intel SC5600BASE Service Guide - Page 32
Removing and Installing the Air Duct
View all Intel SC5600BASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Hardware Installations and Upgrades 4. Fit the right edge of the bezel assembly against the right side of the chassis. 5. Engage the plastic bezel hooks (see letter "D") into the raised metal slots at the chassis edge. 6. Rotate the bezel assembly toward the chassis. 7. Latch the two plastic tabs (see letter "E") on the left side of the bezel assembly to the chassis. Figure 11. Installing the Front Bezel Removing and Installing the Air Duct Always operate your server chassis with the air duct in place. The air duct is required for proper airflow within the chassis. For instructions on adding or replacing a processor, first remove the air duct, and then see your server board user guide for instructions on processor installations and removals. Return to these instructions to reinstall the air duct after installing your processor and heat sink. Removing the Air Duct 1. Observe the safety and ESD precautions at the beginning of this book. See "Appendix B: Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 26. 18 Intel® Server Chassis SC5600 Service Guide