Intel SC5600BASE Service Guide - Page 39
Installing a DVD- or CD-ROM Drive
View all Intel SC5600BASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Hardware Installations and Upgrades Figure 18. Removing DVD or CD-ROM Drive 7. If you are not replacing with another drive, re-attach a pair of slides to an EMI shield and reinsert the EMI shield/slide assembly into the chassis for proper airflow. Figure 19. Re-inserting Empty EMI Shield/Slide Assembly 8. Install the front bezel. For instructions, see "Removing and Installing the Front Bezel." 9. Install the chassis cover. For instructions, see "Installing the Chassis Cover." 10. Plug all peripheral devices and the AC power cable into the server. 11. Power up the server. Installing a DVD- or CD-ROM Drive 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. If it is installed, remove the front bezel. For instructions, see "Removing and Installing the Front Bezel." 5. Remove an EMI shield/slide assembly from the upper device bay by pressing the two slide assembly latches inward (see letter "A" in Figure 20). Remove the slides from the EMI shield by pulling the slides away from the EMI shield to release them from the EMI shield (see letter "B"). Intel® Server Chassis SC5600 Service Guide 25