Intel SC5600BASE Service Guide - Page 57
Removing and Installing PCI Add-in Boards
View all Intel SC5600BASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Hardware Installations and Upgrades Removing and Installing PCI Add-in Board(s) Removing PCI Add-in Board(s) CAUTIONS When removing a full-length add-in card, you must pull back the latch on the plastic card guide at the front of the chassis to release the card from the card guide. 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. If it is installed, remove the front bezel. For instructions, see "Removing and Installing the Front Bezel." 5. If necessary, remove any cables attached to the add-in card. 6. Remove the PCI add-in card retainer. Press in on the two plastic tabs (see letter "A" in Figure 49) to release the PCI add-in card retainer from the chassis. Open the back panel PCI add-in card retention device (see letter "B") by pressing open from the inside of the chassis. Figure 49. Preparing Chassis for Removal of PCI add-in board Intel® Server Chassis SC5600 Service Guide 43