Invacare M91 Owners Manual - Page 23
Lifting/Stairways
View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
SECTION 3-SAFETY/HANDLING OF WHEELCHAIRS Lifting/Stairways ƽ WARNING DO NOT attempt to move an occupied power wheelchair between floors using a stairway. Use an elevator to move an occupied power wheelchair between floors. If moving a power wheelchair between floors by means of a stairway, the occupant MUST be removed and transported independently of the power wheelchair. Extreme caution is advised when it is necessary to move an unoccupied power wheelchair up or down the stairs. Invacare recommends using two assistants and making thorough preparations. Use ONLY secure, nondetachable parts for hand-hold supports. It is strongly recommended to lift the wheelchair only by the rear frame and the front forks - otherwise injury or damage may occur. DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair. The weight of the wheelchair with batteries and without the user is between 203 and 318 lbs. Use proper lifting techniques (lift with your legs) to avoid injury. NOTE: For this procedure, refer to FIGURE 3.4. Follow this procedure for moving the wheelchair between floors when an elevator is NOT available or lifting the wheelchair is necessary: 1. Remove the occupant from the wheelchair. Rear Frame Front Forks (Front Edge) 2. Bend your knees and keep your back straight. 3. Using the rear frame and the front edge of the front forks as hand hold supports, transfer the wheelchair base to the desired location. FIGURE 3.4 Lifting/Stairways - Hand Hold Supports ƽ WARNING: ESCALATORS DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur. Part No 1141450 23 Pronto® M91™ with SureStep®