Invacare M91 Owners Manual - Page 57
Engaging/Disengaging Motor Release Lever - drive wheels
View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
SECTION 10-SHROUD/WHEELS Engaging/Disengaging Motor Release Lever ƽ WARNING DO NOT engage or disengage the motor release lever until the On/Off switch on the joystick is in the Off position. CAUTION Ensure both motor release levers are fully engaged before driving the wheelchair NOTE: For this procedure, refer to FIGURE 10.2. NOTE: The motor lock disengagement/engagement allows freewheeling or joystick controlled operation. Freewheeling allows an attendant to maneuver the wheelchair without power. 1. Locate the motor release handles on the motors protruding through the shrouds by the rear springs. 2. Perform one of the following: • To disengage the motor release levers ‐ Slide the motor lock lever towards the outside of the wheelchair (free wheel position) (Detail "A"). NOTE: This allows the wheelchair to freewheel for pushing if necessary • To engage the motor release levers ‐ Slide the motor lock handles towards the center of the wheelchair (drive position) (Detail "A"). NOTE: This allows the motors to drive the wheels. Detail "A" Motor Release Lever Towards Center of Wheelchair Towards Outside of Wheelchair Motor Locks Disengaged (Freewheel Mode) Motor Locks Engaged (Drive Mode) FIGURE 10.2 Engaging/Disengaging Motor Release Lever Part No 1141450 57 Pronto® M91™ with SureStep®