Invacare M91 Owners Manual - Page 41
Replacing the Seat Positioning Strap
View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
SECTION 7-SEAT Replacing the Seat Positioning Strap ƽ WARNING ALWAYS wear your seat positioning strap. The seat positioning strap is a positioning belt ONLY. It is not designed for use as a safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt must be replaced IMMEDIATELY. NOTE: For this procedure, refer to FIGURE 7.7 on page 41. 1. Remove the two mounting screws and washers that secure the seat positioning straps to the seat frame. 2. Remove the two halves of the seat positioning strap from the rear seat frame. 3. Reposition the two new seat positioning strap halves underneath seat rails. 4. Reinstall the two mounting screws and washers that secure the seat positioning straps to the seat frame. Securely tighten. Seat Frame Rear of Seat Frame Seat Assembly Seat Positioning Strap Washer Seat Positioning Strap Front of Seat Frame Mounting Screws Washer Seat Rail FIGURE 7.7 Replacing the Seat Positioning Strap Part No 1141450 41 Pronto® M91™ with SureStep®