Invacare P9000XDT1818 Owners Manual - Page 39

Seat And Back

Get Invacare P9000XDT1818 PDF manuals and user guides View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

SECTION 8-SEAT AND BACK SECTION 8-SEAT AND BACK ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service verify that on/off switch on the joystick is in the off position. Replacing the Seat Upholstery NOTE: For the following procedure, refer to FIGURE 8.1. 1. Remove the mounting screws that secure the existing seat upholstery to the wheelchair frame. NOTE: Refer to the following table to determine the number of mounting screws for each seat depth. SEAT DEPTH 16 inch 18 inch NUMBER OF SCREWS 8 10 2. Remove the existing seat upholstery from the wheelchair frame. 3. Install new seat upholstery by reversing Steps 1-2. Mounting Screws 16-inch Seat Depth Seat Upholstery Wheelchair Frame FIGURE 8.1 Replacing the Seat Upholstery Part No. 1118386 39 P9000™ XDT

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
SECTION 8—SEAT AND BACK
Part No. 1118386
39
P9000
™
XDT
SECTION 8—SEAT AND BACK
±
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that on/off switch
on the joystick is in the off position.
Replacing the Seat Upholstery
NOTE: For the following procedure, refer to FIGURE 8.1.
1.
Remove the mounting screws that secure the existing seat upholstery to the
wheelchair frame.
NOTE: Refer to the following table to determine the number of mounting screws for each seat
depth.
2.
Remove the existing
seat upholstery from the wheelchair frame.
3.
Install new seat upholstery by reversing Steps 1-2.
FIGURE 8.1
Replacing the Seat Upholstery
SEAT DEPTH
NUMBER OF SCREWS
16 inch
18 inch
8
10
Seat Upholstery
Wheelchair Frame
Mounting Screws
16-inch Seat Depth