Invacare P9000XDT1818 Owners Manual - Page 41
Adjusting the Back Height
View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
SECTION 8-SEAT AND BACK Adjusting the Back Height NOTE: For this procedure, refer to FIGURE 8.3. NOTE: Back canes must be adjusted to the same height. 1. Remove the two mounting screws and locknuts that secure the two back canes to the wheelchair frame. 2. Reposition the back canes to the desired height adjustment position. 3. Reinstall the mounting screws and locknuts that secure the back canes to the wheelchair frame and securely tighten. Back Cane Mounting Screw Wheelchair Frame Locknut Back Height (in inches) *HOLE# 1 2 3 HEIGHT 17 18 19 *NOTE: Holes numbered from bottom to top for reference only. (There are no numbers on the back canes or wheelchair frame.) FIGURE 8.3 Adjusting the Back Height Part No. 1118386 41 P9000™ XDT
SECTION 8—SEAT AND BACK
Part No. 1118386
41
P9000
™
XDT
Adjusting the Back Height
NOTE: For this procedure, refer to FIGURE 8.3.
NOTE: Back canes must be adjusted to the same height.
1.
Remove the two mounting screws and locknuts that secure the two back canes to the
wheelchair frame.
2.
Reposition the back canes to the desired height adjustment position.
3.
Reinstall the mounting screws and locknuts that secure the back canes to the
wheelchair frame and securely tighten.
FIGURE 8.3
Adjusting the Back Height
Mounting Screw
Back Cane
Locknut
Wheelchair Frame
Back Height (in inches)
*HOLE#
1
2
3
HEIGHT
17
18
19
*NOTE: Holes numbered from bottom to top for reference only. (There are no numbers on the
back canes or wheelchair frame.)