Invacare P9000XDT1818 Owners Manual - Page 43

Joystick

Get Invacare P9000XDT1818 PDF manuals and user guides View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

SECTION 9-JOYSTICK SECTION 9-JOYSTICK ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the OFF position. Preparing the Joystick for Use NOTE: For this procedure, refer to FIGURE 9.1. NOTE: The joystick is factory installed on the right side of the wheelchair. To reposition the joystick onto the left side of the wheelchair, refer to Repositioning the Joystick on page 44. The joystick should be repositioned by a qualified technician. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Slide joystick mounting tube to the desired position. 3. Turn the adjustment lock lever to secure the joystick mounting tube in the mounting bracket. Mounting Bracket Joystick Mounting Tube Adjustment Lock Lever FIGURE 9.1 Preparing the Joystick for Use Part No. 1118386 43 P9000™ XDT

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
SECTION 9—JOYSTICK
Part No. 1118386
43
P9000
™
XDT
SECTION 9—JOYSTICK
±
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the OFF position.
Preparing the Joystick for Use
NOTE: For this procedure, refer to FIGURE 9.1.
NOTE: The joystick is factory installed on the right side of the wheelchair. To reposition the joystick
onto the left side of the wheelchair, refer to Repositioning the Joystick
on page 44. The joystick
should be repositioned by a qualified technician.
1.
Turn the adjustment lock lever to release the joystick mounting tube from the
mounting bracket.
2.
Slide joystick mounting tube to the desired position.
3.
Turn the adjustment lock lever to secure the joystick mounting tube in the mounting
bracket.
FIGURE 9.1
Preparing the Joystick for Use
Joystick Mounting Tube
Mounting Bracket
Adjustment Lock Lever