Invacare P9000XDT1818 Owners Manual - Page 52

SECTION 11-BATTERIES 1. If necessary, remove the battery boxes from the wheelchair. Refer to Removing/Installing the Battery Boxes on page 49. 2. Secure the battery lifting strap to battery terminal(s)/post(s). CAUTION Some battery manufacturers mold a carrying strap and/or hold down flanges directly into the battery case. Batteries which interfere with the battery box cannot be used for these applications. Attempting to "wedge" a battery into a battery box may damage the box and/or the battery. 3. Place batteries into battery box bottom. Battery Lifting Strap Molded Carrying Strap or Hold Down Flanges U1 Battery Box Bottom Battery Battery Group 22NF ONLY Terminal(s)/Post(s) 22NF Battery Box, Bottom FIGURE 11.5 Installing/Removing Batteries Into/From Battery Boxes Connecting Battery Cables ƽ WARNING The use of rubber gloves and chemical goggles or face shields is recommended when working with batteries. NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery terminal(s)/post(s) at the same time. An electrical short may occur and serious personal injury or damage may occur. The correct battery terminal configurations shown in FIGURE 11.6 on page 53 MUST be used. Batteries that have the reversed terminal configuration MUST NOT be used. Otherwise, serious injury or damage may occur. P9000™ XDT 52 Part No. 1118386