Invacare P9000XDT1818 Owners Manual - Page 42
Replacing Seat Positioning Strap
View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SECTION 8-SEAT AND BACK Replacing Seat Positioning Strap NOTE: For this procedure, refer to FIGURE 8.4. 1. If necessary, remove the seat cushion from the seat upholstery. 2. Remove the two rear phillips screws and washers that secure the seat upholstery and seat positioning strap to the crossbraces. 3. Remove the two halves of the seat positioning strap from the crossbraces. 4. Position the two new seat positioning strap halves between the seat upholstery and the crossbraces. 5. Reinstall the rear phillips screws and washers that secure the seat upholstery and seat positioning strap to the crossbraces. NOTE: Washer is positioned on top of seat upholstery. 6. If necessary, reinstall the seat cushion onto the seat upholstery. Washer Rear Phillips Screw Seat Upholstery Seat Positioning Strap Crossbrace FIGURE 8.4 Replacing Seat Positioning Strap P9000™ XDT 42 Part No. 1118386