Invacare P9000XDT1818 Owners Manual - Page 50
Installing/Removing Battery Tray
View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
SECTION 11-BATTERIES 4. Place rear battery box onto the battery tray and connect the rear battery box to the front battery box. 5. Connect the front battery box to the controller. ƽ WARNING The battery box retaining strap MUST be fastened securely and adjusted properly to hold battery boxes in place before using the wheelchair. 6. Connect the battery box retaining strap clip together and adjust if necessary. To Controller Battery Tray Front Battery Box Rear Battery Box Front Battery Box Connectors Rear Battery Box Connector Retaining Strap Retaining Strap Clip FIGURE 11.3 Removing/Installing the Battery Boxes Installing/Removing Battery Tray NOTE: For this procedure, refer to FIGURE 11.4. NOTE: To remove the battery tray from the wheelchair, reverse the following procedure. 1. Attach the key slot bracket located at the front of the battery tray over the crossbrace bolt bushing under the seat upholstery of the wheelchair. 2. Attach the hanger brackets to the wheelchair frame. Hanger Bracket Key Slot Bracket Battery Tray Wheelchair Frame Crossbrace Bolt Bushing FIGURE 11.4 Installing/Removing Battery Tray P9000™ XDT 50 Part No. 1118386