Invacare P9000XDT1818 Owners Manual - Page 60

Clutch/motor

Get Invacare P9000XDT1818 PDF manuals and user guides View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

SECTION 12-CLUTCH/MOTOR LOCK SECTION 12-CLUTCH/MOTOR LOCK ƽ WARNING After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result. Engaging/Disengaging the Clutches ƽ WARNING DO NOT engage or disengage the clutches until the power is off. NOTE: For this procedure, refer to FIGURE 12.1. The clutch engagement/disengagement allows freewheeling or joystick controlled operation. Freewheeling allows an attendant to maneuver the wheelchair without power. To engage/disengage the clutches: 1. Locate the clutch handles on motors. ƽ WARNING If clutch handles are forced to engage in the wrong direction as shown in FIGURE 12.1, the motors will be damaged and will need to be replaced. 2. Perform one of the following: • To Engage: turn the clutch handles until they are pointing towards the rear of the wheelchair. NEVER try to turn the clutch handles towards the front of the wheelchair. • To Disengage: turn the clutch handles until they are pointing towards the rear wheels. NEVER try to turn the clutch handles towards the inside of the wheelchair. Top View Of Wheelchair Disengaged (Toward rear wheels) NOTE: NEVER force clutch handles in these directions. Engaged (Toward rear of wheelchair) Clutch Handle Clutch Handle FIGURE 12.1 Engaging/Disengaging the Clutches P9000™ XDT 60 Part No. 1118386

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
SECTION 12—CLUTCH/MOTOR LOCK
P9000
™
XDT
60
Part No. 1118386
SECTION 12—CLUTCH/MOTOR
LOCK
±
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Engaging/Disengaging the Clutches
±
WARNING
DO NOT engage or disengage the clutches until the power is off.
NOTE: For this procedure, refer to FIGURE 12.1.
The clutch engagement/disengagement allows freewheeling or joystick controlled
operation. Freewheeling allows an attendant to maneuver the wheelchair without power.
To engage/disengage the clutches:
1.
Locate the clutch handles on motors.
±
WARNING
If clutch handles are forced to engage in the wrong direction as shown in
FIGURE 12.1, the motors will be damaged and will need to be replaced.
2.
Perform one of the following:
•
To Engage: turn the clutch handles until they are pointing towards the rear of the
wheelchair. NEVER try to turn the clutch handles towards the front of the wheelchair.
•
To Disengage: turn the clutch handles until they are pointing towards the rear wheels.
NEVER try to turn the clutch handles towards the inside of the wheelchair.
FIGURE 12.1
Engaging/Disengaging the Clutches
Disengaged (Toward rear wheels)
Top View Of Wheelchair
Clutch Handle
Clutch Handle
NOTE: NEVER force clutch
handles in these directions.
Engaged (Toward
rear of wheelchair)