Invacare P9000XDT1818 Owners Manual - Page 40
Replacing the Back Upholstery
View all Invacare P9000XDT1818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SECTION 8-SEAT AND BACK Replacing the Back Upholstery NOTE: For the following procedure, refer to FIGURE 8.2. 1. Flip swing back arms up and out of the way. Refer to Swing-Back Arms on page 38. 2. Remove the six mounting screws and washers that secure the existing back upholstery to the back canes. 3. Cut the tie wraps that secure the existing back upholstery to the wheelchair frame. 4. Securely tighten the new back upholstery to the back canes with the six mounting screws and washers starting with the top hole of the back cane. 5. Install two new tie wraps through the bottom holes of the upholstery to the bottom of the back upholstery to the back canes. 6. Flip swing-back arms down for use. Refer to Swing-Back Arms on page 38. Washers Mounting Screws Back Upholstery Back Cane Tie Wraps Washers Mounting Screws FIGURE 8.2 Replacing the Back Upholstery P9000™ XDT 40 Part No. 1118386