JVC GV-LS2W Detailed User Guide - Page 29
Attaching/Removing the Battery
View all JVC GV-LS2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparation Attaching/Removing the Battery The camera can run with the battery power only. When the battery (BN-VG139U) (sold separately) is attached, videos can be transmitted/recorded even in places where the AC adapter cannot be used. • The battery cannot be used when the pantilter is attached. • Turn off the power before attaching/removing the battery. • The following cannot be used while the battery is attached: - LAN terminal, network mode switch, reset button CAUTION • Be sure to use a battery of our manufacture. If a battery not of our manufacture is used, the safety and performance are not guaranteed. • Charging may take time or may not be possible in places outside the operating temperature range. Attaching Insert the battery deeply, and then slide it to the right until it clicks. Approximate charging times Charging time BN-VG139U (sold 6 hr. 10 min. separately) Approximate recording times Removing Slide the battery to the left, and pull it out toward you while pushing in the lever below the battery. Actual Continuous shooting time shooting time BN-VG139U (sold 1 hr. 55 min. separately) 2 hr. 55 min. Charging Connect the adapter to the DC connector of the camera, and turn off the power. Charging starts. The power button of the camera blinks during charging. The power button turns off when charging is complete. 29