JVC GV-LS2W Detailed User Guide - Page 41

Setting Item List If you log in as an administrator on a browser of your computer, you can change the settings. The settings are categorized into "NETWORK", "CAMERA/PAN TILTER", and "MANAGE". To display the setting item list, "Configuring the Camera Settings Appropriate for Your Needs" (page 13) "NETWORK" Configure the settings for the network and streaming on "NETWORK". "NETWORK" is categorized into "WIRED NETWORK", "WIRELESS NETWORK", "MONITORING SETTINGS" and "STREAM SETTINGS". "WIRED NETWORK" Change the settings for establishing a wired connection. 1 "WIRELESS NETWORK" Change the settings for establishing a wireless connection. 3 1 2 2 Information 1 "NETWORK SETTINGS" Select "AUTO" or "MANUAL". If "MANUAL" is selected, enter "IP ADDRESS", "SUBNET MASK", "DEFAULT GATEWAY", "PRIMARY DNS", and "SECONDARY DNS" appropriately for your environment. 2 "MAC ADDRESS" Displays the MAC address (physical address) of the unit. It may be required when you access from a computer or smartphone. 3 "SAVE" button After changing the above settings, click this button to save the changes. 3 4 1 "DIRECT CONNECTION" Setting for connecting directly to a computer wirelessly (Wi-Fi). "SSID", "PASSWORD", "PASSWORD (CONFIRM)" Change the SSID and password of the unit. The SSID and password will be displayed on your computer. Enter 2 to 25 characters for the SSID, and 8 to 63 characters for the password. "ENFORCED GROUP OWNER" Set whether to become a group owner enforcedly when connecting directly. Set it to "OFF" when you cannot connect to a Wi-Fi direct compatible device. (When it is set to "OFF", you cannot connect to any Wi-Fi direct incompatible device.) "MAC ADDRESS" Displays the MAC address (physical address) of the unit when connecting to a computer directly (Wi-Fi Direct). It may be required when you access from a computer or smartphone. 2 "ACCESS POINT CONNECTION" 41