JVC GV-LS2W Detailed User Guide - Page 33

Controlling from a Web Browser

Get JVC GV-LS2W PDF manuals and user guides View all JVC GV-LS2W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Use Controlling from a Web Browser You can control the unit from a web browser without installing additional software. To watch a video via a network, "MONITORING SETTINGS" ( ➭ page 18) must be set. Required operating environment OS: Windows 7 Browser: Internet Explorer 9 or later Logging in Use "USERNAME" and "PASSWORD" of the administrator ( ➭ page 16). 1 If the power is not turned on, press and hold the power button to power on. The record button starts blinking. Wait until it stops blinking and off. 2 Start Internet Explorer, and enter "http:// (camera's IP address):80" in the address bar. • If a wired connection is established, the factory setting is that the camera's IP address is "192.168.1.100". • If the camera is connected wirelessly, the factory setting is that the camera's IP address is assigned automatically by the access point. For values to be assigned, refer to the setting screen, etc. of the access point. • To access the camera on the Internet, enter the URL obtained via the DDNS service instead of the camera's IP address. ( ➭ page 18) 3 Enter the user name and password of the administrator. Initial setting: USERNAME "root", PASSWORD "password". 4 Click the "LOG IN" button. If login is successful, the "MONITOR" screen appears. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
33
Use
Controlling from a Web Browser
You can control the unit from a web browser without installing additional software.
To watch a video via a network, "MONITORING SETTINGS"
(
➭
page 18)
must be set.
Required operating environment
OS: Windows 7
Browser: Internet Explorer 9 or later
Logging in
Use "USERNAME" and "PASSWORD" of the
administrator
(
➭
page 16)
.
1
If the power is not turned on, press and hold the
power button to power on.
The record button starts blinking. Wait until it stops
blinking and off.
2
Start Internet Explorer, and enter "http://
(camera's IP address):80" in the address bar.
•
If a wired connection is established, the factory
setting is that the camera's IP address is
"192.168.1.100".
•
If the camera is connected wirelessly, the factory
setting is that the camera's IP address is assigned
automatically by the access point. For values to
be assigned, refer to the setting screen, etc. of the
access point.
•
To access the camera on the Internet, enter the
URL obtained via the DDNS service instead of
the camera's IP address.
(
➭
page 18)
3
Enter the user name and password of the
administrator.
Initial setting: USERNAME "root", PASSWORD
"password".
4
Click the "LOG IN" button.
If login is successful, the "MONITOR" screen
appears.