JVC GYHD110U Instructions - Page 26

SETTING AND ADJUSTMENTS BEFORE SHOOTING Setting the Video Format SHUTTER dial STATUS button Set the video format using the FRAME RATE item and the REC item on the VIDEO FORMAT menu screen. „ Setting the FRAME RATE Item 1. Press the STATUS button for at least 1 second. • The TOP MENU screen is displayed. 2. Turn the SHUTTER dial and bring the cursor (K) to the VIDEO FORMAT.. item and press the SHUTTER dial. • The VIDEO FORMAT menu screen is displayed. 3. Turn the SHUTTER dial and bring the cursor (K) to the FRAME RATE item and press the SHUTTER dial. • The setting for the selected item flashes and can be changed. "CHANGE THE SYSTEM" is displayed on the screen. 4. Turn the SHUTTER dial, change the setting and push the SHUTTER dial. • The setting stops flashing and is temporarily set. • Move the cursor (K) to the EXECUTE item and EXE- CUTE flashes. 5. Push the SHUTTER dial. • "REBOOT! SYSTEM CHANGE" is displayed on the screen and after a few seconds the system is rebooted. „ Setting the REC Item Set the REC item using the same steps as for the FRAME RATE item. MEMO • If you change the FRAME RATE item setting, the system is rebooted. • The synchronous video signal is momentarily disturbed when the REC item setting is switched. „ About the Motion Smooth Function When you set the MOTION SMOOTH item on the CAMERA PROCESS [2/2] menu screen to ON with the REC item set to HDV-HD30P, HDV-HD25P or HDV-HD24P, the video can be played back more smoothly than with normal progressive video. X See page 68. This function is only enabled during playback. It is not available during live output or shooting. 46 SETTING AND ADJUSTMENTS BEFORE SHOOTING Camera Settings VTR indicator 4. 3. 1. A B 1. Set the switch positions. A. [GAIN] switch: Set to L ( 0 dB). B. [WHT. BAL] (Auto White Balance) switch: Set to A or B. 2. Set the lens' iris mode switch to "A" (Auto iris side). 3. Select the ND filter. ND FILTER OFF OFF 1 1/4ND 2 1/16ND Suitable Location Indoors, dark outdoors Outdoors under clear sky Outdoors under extremely clear sky 4. Set the shutter speed to OFF with the SHUTTER dial. CAM/VTR button Screen Size (4:3/16:9) Mode Selection ASPECT item 4:3 4:3 TV The screen size of recorded images can be selected with the ASPECT item on the VIDEO FORMAT menu screen. X See page 64. • To record using the standard screen, set ASPECT to 4:3. • To record using the 16:9 screen, set ASPECT to 16:9. 16:9 TV 16:9 4:3 TV [SQUEEZE] 4:3 TV [SIDE CUT] 4:3 TV [LETTER] 16:9 TV MEMO • When you set the REC item on the VIDEO FORMAT menu to HDV format, the ASPECT item is fixed at 16:9 and "[16:9]" is displayed. • If the above applies, you can set to display the image in the style of 4:3 televisions. X See page 64. • In the SAFETY ZONE item on the LCD/VF [1/3] menu screen, you can display the safety zone for a standard screen as well as a 16:9 screen in the viewfinder or LCD monitor. X See page 74. • When the ASPECT item is set to 4:3, the screen that is displayed may differ depending on the 16:9 television you are using. 47