JVC GYHD110U Instructions - Page 38

MENU SCREENS COLOR MATRIX ADJUST Menu Screen Item R GAIN R ROTATION G GAIN G ROTATION B GAIN B ROTATION PAGE BACK Function/Setting (bold characters indicate initial settings) For manually adjusting the shading of the R axis of the color matrix (red and cyan). Increase the number : Enhances red and cyan. Decrease the number : Reduces red and cyan. [Settings: MIN (-5), -4 - NORMAL (0) - 4, MAX (5)] For manually adjusting the color phase of the R axis of the color matrix (red and cyan). Increase the number : Increases yellowishness of red color and bluishness of cyan color. Decrease the number : Increases bluishness of red color and greenishness of cyan color. [Settings: MIN (-5), -4 - NORMAL (0) - 4, MAX (5)] For manually adjusting the shading of the G axis of the color matrix (green and magenta). Increase the number : Enhances green and magenta. Decrease the number : Reduces green and magenta. [Settings: MIN (-5), -4 - NORMAL (0) - 4, MAX (5)] For manually adjusting the color phase of the G axis of the color matrix (green and magenta). Increase the number : Increases bluishness of green color and reddishness of magenta color. Decrease the number : Increases yellowishness of green color and bluishness of magenta color. [Settings: MIN (-5), -4 - NORMAL (0) - 4, MAX (5)] For manually adjusting the shading of the B axis of the color matrix (blue and yellow). Increase the number : Enhances blue and yellow. Decrease the number : Reduces blue and yellow. [Settings: MIN (-5), -4 - NORMAL (0) - 4, MAX (5)] For manually adjusting the color phase of the B axis of the color matrix (blue and yellow). Increase the number : Increases reddishness of blue color and greenishness of yellow color. Decrease the number : Increases greenishness of blue color and reddishness of yellow color. [Settings: MIN (-5), -4 - NORMAL (0) - 4, MAX (5)] Press the SHUTTER dial to return to the ADVANCED PROCESS screen when cursor is at this position. SKIN COLOR ADJUST Menu Screen When you enter the SKIN COLOR ADJUST screen, the areas where the skin detail function is applied are displayed in color, and other areas are displayed in black and white. Item SKIN COLOR DET. SKIN COLOR RANGE PAGE BACK Function/Setting (bold characters indicate initial settings) Sets the color used by the skin detail function. STOP : Stops loading the color used by the skin detail function. EXECUTE : Loads the color used by the skin detail function. X See "Using the Skin Detail Function" on page 87. Adjusts the range of skin colors to which the skin detail function is applied. Adjust as you check the color range. Increase the number : Widens the range. Decrease the number : Narrows the range. [Settings: NARROW (-10), -9 - NORMAL (0) - 9, WIDE (10)] MEMO When the COLOR GAIN item is "OFF" on the ADVANCED PROCESS menu screen, only the areas where the skin detail function is running are displayed using skin colors. When the cursor is in this position, press the SHUTTER dial to return to the ADVANCED PROCESS menu screen. MENU SCREENS SWITCH MODE Menu Screen The SWITCH MODE menu screen is only displayed in camera mode. Item SHUTTER Function/Setting (bold characters indicate initial settings) Sets the fixed value (STEP) for values that can change using the SHUTTER dial on the right panel or the VARIABLE used when shooting computer monitors. STEP : Switches the shutter speed using fixed values. VARIABLE : Set when shooting a computer monitor, etc. You can set the following using the REC item on the VIDEO FORMAT menu screen. (This is fixed at EEI when in FULL AUTO mode) REC Item DV-60I HDV-SD60P HDV-HD30P DV-50I HDV-SD50P HDV-HD25P DV-25P DV-24P DV-24PA HDV-HD24P Setting for STEP Setting for VARIABLE 1/7.5, 1/15, 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/60.19 - 1/1998.0 1/10000 1/6.25, 1/12.5, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Initial value: 1/25 1/6, 1/12, 1/24, 1/48, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Initial value: 1/48 1/50.17 - 1/1982.8 1/25.04 - 1/1982.8 1/24.01 - 1/1998.0 1/48.11 - 1/1998.0 FAW GAIN L GAIN M GAIN H USER1 USER2 USER3 Sets the positions to assign the FAW (Full Auto White Balance) function to the [WHT.BAL] white balance selector switch c on page 15. (Fixed at FAW when in FULL AUTO mode) NONE : The FAW function is not assigned. A : Assigns FAW to the A position. B : Assigns FAW to the B position. PRESET : Assigns FAW to the PRESET position. Sets the gain value for each position on the [GAIN] sensitivity selector switch b on page 15. [Setting: 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB, ALC] (Fixed at ALC in FULL AUTO mode) Initial values: L: 0dB, M: 9dB, H: 18dB You can assign one of the following menu functions to the [USER1/2/3] USER1/2/3 buttons 8 on page 14 to each button. Set according to the shooting conditions. Setting NONE BARS PRESET TEMP. B.STRETCH1 B.STRETCH2 B.STRETCH3 B.COMPRESS1 B.COMPRESS2 B.COMPRESS3 AE LEVEL+ AE LEVEL- RET Description Does not function. Assigns "BARS" item functions in the CAMERA OPERATION menu screen. Assigns "PRESET TEMP." item functions in the CAMERA OPERATION menu screen. X See "CAMERA OPERATION Menu Screen" on page 66. Assigns "BLACK" item functions in the CAMERA PROCESS [1/2] menu screen. X See "CAMERA PROCESS [1/2] Menu Screen" on page 67. Assigns "AE LEVEL" item functions in the CAMERA OPERATION menu screen. MEMO Cannot assign to the USER3 button. If you assign these menu functions, assign AE LEVEL+ to the USER1 button, AE LEVEL- to the USER2 button. Assigns the normal RET button function. LENS RET PAGE BACK Sets the lens RET button functions. (This does not function if there is not RET button on the lens you are using.) RET : Functions as a normal RET button. FOCUS ASSIST : Functions as the FOCUS ASSIST button. When the cursor is in this position, press the SHUTTER dial to return to the TOP MENU screen. 70 71