JVC GYHD110U Instructions - Page 42

MENU SCREENS HEADER REC Menu Screen The HEADER REC menu screen is used for settings related to the HEADER REC function. (X See page 52.) Item START KEY TC DATA UB DATA BARS TIME BLACK TIME PAGE BACK Function/Setting (bold characters indicate initial settings) Sets whether the HEADER REC operation should be executed when the REC/VTR trigger button is pressed while the STOP button is pressed. DISABLE : HEADER REC operation is not executed. STOP+REC : HEADER REC operation is executed. Sets the time code value for the point when the Record-Standby mode is engaged following completion of HEADER REC. EXECUTE : Confirms the set time code. ZERO PRESET : Resets all time codes to "0". CANCEL : Clears the set time code. The frame mode is set depending on the setting in the DROP/NON DROP item on the TC/UB/CLOCK menu screen. * The time code value at the point when the Record-Standby mode is engaged may differ some frames from the val- ue set for this item. Sets the user's bits of the HEADER REC section. EXECUTE : Confirms the set user's bits. ZERO PRESET : Resets all user's bits data to "0". CANCEL : Clears the set user's bits. MEMO • The user's bits for the normal recording section are set on the TC/UB/CLOCK menu screen. • When the "UB REC" item is set to "OFF is displayed and this cannot be selected. Sets the duration (seconds) in which the color bar signal and test tone (1 kHz) is recorded during HEADER REC. (1sec steps) [Settings: 0SEC - 30SEC - 99SEC] Sets the duration (seconds) in which the black signal is recorded during HEADER REC. (1-sec steps) [Settings: 0SEC - 30SEC - 99SEC] The TC/UB/CLOCK menu screen returns when the SHUTTER dial is pressed. MENU SCREENS TIME/DATE Menu Screen Item DISPLAY DISPLAY MODE DISPLAY STYLE DATE STYLE TIME STYLE SEC DISPLAY TIME SHIFT CLOCK ADJUST PAGE BACK Function/Setting (bold characters indicate initial settings) Sets whether the date and time are shown in the status display on the LCD monitor or in the viewfinder. OFF : Not displayed. ON : Displayed. When a tape with time and date not recorded is played back, there will be no display of time and date even when this item is set to ON. In the Camera mode, the date and time are displayed in accordance with the following settings. The date and time recorded on a tape are displayed in accordance with the following settings. BARS+CAM : Date and time are always displayed. BARS : Date and time are displayed when the color bars are output. CAM : Date and time are displayed when the camera images are output. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. Selects the style for the date and time display. DATE+TIME : Date and time are displayed. DATE : Date only is displayed. TIME : Time only is displayed. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. Selects the style for the date display. YY/MM/DD : Displayed in the format of year/month/date. MM/DD/YY : Displayed in the format of month/date/year. DD/MM/YY : Displayed in the format of date/month/year. Variation Range: U model: MM/DD/YY E model: DD/MM/YY When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. Selects the style for the time display. 24 HOUR : Displays the time using the 24-hour system. 12 HOUR : Displays the time using the 12-hour system. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. Selects whether to display the seconds in the time display. ON : Seconds are displayed. OFF : Seconds are not displayed. When the DISPLAY item is set to OFF, "- - -" is indicated and this item cannot be selected. Sets the clock OFFSET time. (1H steps) Adds time to the built-in clock (time compensation) and displays it. The adjusted time is also recorded on the tape. [Settings: -23H - -1H, OFF, +H - +23H] To adjust the date and time, align the cursor with this position and then press the SHUTTER dial. The date and time are set on the CLOCK ADJUST screen. X See "Setting the Date and Time" on page 38. The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed while the cursor is at this position. 78 79