JVC GYHD110U Instructions - Page 32

USING EXTERNAL COMPONENTS HDV/DV Dubbing 1. IEEE1394 switch IEEE 1394 HDV DV Recording unit PB VIDEO/Y PR DC INPUT LINE OUTPUT IEEE1394 Signal flow 2. IEEE1394 cable CAUTION • Set the IEEE1394 switch on both devices to either HDV or DV. • Start recording after making sure that both devices are properly connected. 5. VIDEO FORMAT menu screen Connecting the GY-HD110 to another video component equipped with HDV/DV connector (IEEE1394 standard) using a IEEE1394 cable (optional) enables dubbing of digital signals with high picture quality and high-quality sound. „ Using the GY-HD110 as the playback unit (Dubbing to another video) 1. Set the IEEE1394 switch on the left panel of the cam- corder. DV HDV : When dubbing in DV format : When dubbing in HDV format 2. Connect the IEEE1394 cable. 3. Turn both devices on. 4. Set the camcorder to VTR mode. Press the CAM/VTR button. The VTR indicator lights. 5. Set the PB TAPE item on the VIDEO FORMAT menu screen. X See page 65. Select whether to automatically detect the playback tape video format or play back only a particular format. Normally, use the "AUTO" setting. 6. Insert a videocassette tape. This camcorder Recording unit : Recorded videocassette tape : Videocassette you want to dub 7. Press the PLAY/STILL button on this camcorder to start playback. 8. Start recording on the recording device. See the recording device user manual for more informa- tion. 9. When dubbing is finished, stop recording on the recording device, press the STOP button on the camcorder, and stop the playback. MEMO • Switch the IEEE1394 switch when the camcorder is OFF. • When you dub still images, they are low resolution images. Noise may also enter the audio. • Operations may differ depending on the features and specifications of the connected device, and operations or data exchange may not be possible even if the devices are connected. • If noise appears on the screen or the audio cuts out, reconnect the IEEE1394 cable or turn the GY-HD110 on again. • If you turn the power to the device connected to the IEEE1394 connector on and off or switch the video input, noise may occur in the audio. If you perform this type of operation, set the speaker volume as low as possible on the audio device connected to the camcorder. • Recording may not be possible in some cases even if the recorder is equipped with a IEEE1394 connector. 58 1. IEEE1394 switch IEEE 1394 HDV DV PR VIDEO/Y PR DC INPUT LINE OUTPUT IEEE1394 Signal flow 2. IEEE1394 cable CAUTION • Set the IEEE1394 switch on both devices to either HDV or DV. • Start recording after making sure that both devices are properly connected. 6. TC/UB Date and Time USING EXTERNAL COMPONENTS „ When Using the GY-HD110U/GY-HD111E as Recording Unit (Dubbing From Another Videocassette) 1. Set the IEEE1394 switch on left side of the GY-HD110. DV HDV : When dubbing in DV format : When dubbing in HDV format 2. Connect the units with the IEEE1394 cable. 3. Turn ON both units. 4. Place the GY-HD110 in the VTR MODE. Press the CAM/VTR button to turn on the VTR indicator. 5. Set the frame rate. Set the FRAME RATE item (60/30, 50/25, 24) on the VIDEO FORMAT menu to match the HDV/DV signal frame rate input from the IEEE1394 connector. X See page 64. 6. Set the time code and user bit recording. Set the TC DUPLI. item on the TC/UB/CLOCK menu screen. OFF : Records the TC/UB set in the camcorder. ON : Records the TC/UB for the IEEE1394 input. Date and time data : Records the data sent from the playback device in DV format. Records the data of the internal clock in HDV format. MEMO In HDV format, the UB set in the camcorder is recorded regardless of the setting. 7. Insert the videocassettes. GY-HD110 Playback unit : Insert the videocassette to be dubbed to. : Insert the recorded videocassette. 8. Start playback on the playback unit. For details, see the instructions to the unit used for playback. • The playback picture from the playback unit appears on the GY-HD110's LCD monitor and viewfinder screen. 9. Press the REC/VTR trigger button on the GY-HD110 to start recording. „ To temporarily pause the recording, press the REC or VTR trigger button. „ To restart the recording, press the REC or VTR trigger button again. 10.When dubbing is completed. Press the REC/VTR trigger button or the STOP button on the GY-HD110 to stop recording, and then stop playback on the playback unit. MEMO Depending on the player, sound may not be heard momentarily from this unit when switching modes from STILL to PLAY. 59