Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 108

Clean the PowerSquare, Operator Maintenance Plan, Introduction, CAUTION, Outside of the PowerSquare

Page 108 highlights

6 - Maintenance - Clean the PowerSquare Operator Maintenance Plan Interval • Every week • When the message OPERATOR MAINTENANCE is displayed on the screen. Task Reference Clean the machine. See page 104. Lubricate the stitch head. See page 111. Clean the former roller. See page 105. Clean the polyurethane strips in See the form clamp. page 106. Clean the trimmings-removal fingers. See page 108. Clean excess grease from the See stitch head page 110. Clean the PowerSquare Introduction Clean the PowerSquare every week to remove surface dust. CAUTION: Only clean the machine with materials that are recommended in this manual. Do not use other chemicals or abrasive material. Outside of the PowerSquare Use a moist cloth to clean the outside of the PowerSquare. Touch screen Clean the touch screen with a clean, dry cloth. Never use an abrasive material or chemical to clean the touch screen. Light pressure with a clean, dry cloth is enough to remove fingerprints. Do not use too much force. 104 Watkiss PowerSquare™224 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134

6 - Maintenance - Clean the PowerSquare
104
Watkiss PowerSquare™224 User Manual
Operator Maintenance Plan
Clean the PowerSquare
Introduction
Clean the PowerSquare every week to remove surface dust.
CAUTION:
Only clean the machine with materials that are recommended in
this manual. Do not use other chemicals or abrasive material.
Outside of the PowerSquare
Use a moist cloth to clean the outside of the PowerSquare.
Touch screen
Clean the touch screen with a clean, dry cloth. Never use an abrasive material
or chemical to clean the touch screen. Light pressure with a clean, dry cloth is
enough to remove fingerprints. Do not use too much force.
Interval
Task
Reference
Every week
Clean the machine.
See
page 104.
When the message
OPERATOR MAINTENANCE
is displayed on the screen.
Lubricate the stitch head.
See
page 111.
Clean the former roller.
See
page 105.
Clean the polyurethane strips in
the form clamp.
See
page 106.
Clean the trimmings-removal
fingers.
See
page 108.
Clean excess grease from the
stitch head
See
page 110.