Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 123
Close the PowerSquare, Feed the Stitch-wire, See Lower the Clincher Frame
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
6 - Maintenance - Install New Stitch-wire Close the PowerSquare Step 1 2 3 4 5 Action Information Close the stitch wire cabinet. Lower the PowerSquare main deck. Lower the clincher frame. See "Lower the Clincher Frame" on page 35. Close the folder cover. Close the connecting bridge cover. Feed the Stitch-wire Step 1 2 3 4 5 Action Information Touch START Set the number of stitches to 6. Hand-feed or print an A4 or larger size test job. Check the stitch-wire is loaded. Reset the number of stitches on the touch screen. Touch BASIC > STITCHES. Enter the correct settings on the touch screen, according to the size and thickness of the job. The stitch-wire loads automatically during the stitch head cycle. Check that a stitch is made. If needed, repeat the previous step. If a stitch is still not made, repeat the procedure "Install the Stitchwire into the Stitch Head" on page 118. Watkiss PowerSquare™224 User Manual 119