Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 16
Procedure for a New Job, Action, Information
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 - How to Run the PowerSquare - Enter the Job Settings Procedure for a New Job Step Action Information 1 Touch BASIC . 2 Enter the paper size. Touch PAPER SIZE. Enter the dimensions of the paper. The job setting is easier if you first select a preset paper size, then adjust the settings as necessary. Touch PAPER SIZE > PRESETS > A3 or A4. (USA: 11x17, 8.5x11 or 8.5x14) 3 Enter the page direction. Touch PAGE DIRECTION > LANDSCAPE or PORTRAIT. If the PAGE DIRECTION option is not available, the PAGE DIRECTION cannot be changed. 4 Enter the page rotation set- For A4 paper size, the normal setting for ting. ROTATE is ON. Rotation lets the printer oper- ate at optimum speed. Touch ROTATE to turn the sheet rotation ON or OFF. Always select the page direction before you change the rotate setting. 5 Enter the sheet thickness Touch SET THICKNESS. Set AUTO to ON. Use or '+' or ' - ' to enter the SHEET THICKNESS. Enter the set thickness. See "Set Thickness and Sheet Thickness" on page 10. Touch SET THICKNESS. Set AUTO to OFF. Use '+' or ' - ' to enter the SET THICKNESS. 6 Enter the number of stitches. Touch STITCHES and enter the number of stitches. If needed, the stitch pitch can be changed. See "STITCH PITCH" on page 20. Xerox Nuvera users: Select the correct profile on the printer. 7 Enter the spine form set- The spine form setting is automatic, accord- ting. ing to the SET THICKNESS setting. If needed, the setting can be changed. See "FORM" on page 21 8 Enter the trim setting. The trim setting is automatic, according to the PAGE SIZE and SET THICKNESS settings. To change the setting, touch TRIM. See "TRIM" on page 21 12 Watkiss PowerSquare™224 User Manual