Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 81

See Jam at, JAM AT STACKER

Page 81 highlights

5 - Error Conditions, Problems and Solutions - Message List Message JAM AT SIDE TRIM OUTFEED JAM AT STACKER INFEED Information Reference Open and then close the top cover of the side-trimmer. Then, if necessary, open the top cover of the side-trimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. There is a jam in the stacker infeed. Remove the books from the stacker infeed. Press the reset button on the stacker. See "Jam at stacker infeed (Book Stacker)" on page 90. JAM AT STACKER OUTFEED JAM BEFORE TRIMMER JAM IN GATHERING AREA There is a jam in the stacker outfeed or there are paper-trimmings in the stacker outfeed. Remove the books from the stacker outfeed. Check for paper-trimmings and remove them if present. Press the reset button on the stacker. See "Jam at stacker outfeed (Book Stacker)" on page 91. There is a book jammed before the See "Jam before trimmer. Open the main deck to the Trimmer" on remove the book. page 87. There is a paper jam in the gather- See "Jam in the ing area. Open the connecting Gathering Area" bridge cover, lift the connecting on page 85. bridge and remove the paper jam. Watkiss PowerSquare™224 User Manual 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134

5 - Error Conditions, Problems and Solutions - Message List
Watkiss PowerSquare™224 User Manual
77
JAM AT SIDE TRIM
OUTFEED
Open and then close the top cover
of the side-trimmer.
Then, if necessary, open the top
cover of the side-trimmer and
check for paper trimmings or
obstructions.
Close the top cover
of the side-trimmer.
If the message still does not clear,
use the side-trimmer mains ON/
OFF switch.
Turn the side-trimmer
OFF, wait at least 5 seconds and
then turn the side-trimmer ON.
If the problem continues, then call
your service engineer.
JAM AT STACKER
INFEED
There is a jam in the stacker
infeed.
Remove the
books from
the stacker infeed.
Press the reset
button on the stacker.
See “Jam at
stacker infeed
(Book Stacker)” on
page 90.
JAM AT STACKER
OUTFEED
There is a jam in the stacker out-
feed or there are paper-trimmings
in the stacker outfeed.
Remove
the books from the stacker out-
feed.
Check for paper-trimmings
and remove them if present.
Press the reset button on the
stacker.
See “Jam at
stacker outfeed
(Book Stacker)” on
page 91.
JAM BEFORE TRIM-
MER
There is a book jammed before the
trimmer.
Open the main deck to
remove the book.
See “Jam before
the Trimmer” on
page 87.
JAM IN GATHERING
AREA
There is a paper jam in the gather-
ing area. Open the connecting
bridge cover, lift the connecting
bridge and remove the paper jam.
See “Jam in the
Gathering Area”
on page 85.
Message
Information
Reference