Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 6
Description of the PowerSquare, CAUTION, Installation, How to Get Help, Introduction
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1 - Introduction to the Watkiss PowerSquare™224 - Description of the PowerSquare CAUTION: A CAUTION message tells you that a procedure or operation can damage the machine or the product. To prevent damage, you must follow the instructions. Installation Your PowerSquare must be installed by a Watkiss service engineer. Special knowledge is needed to install the machine. CAUTION: Only connect the machine to a mains power supply of the correct voltage with a good earth-connection. The correct machine-voltage is shown on the label at the mains power supply input on the rear of the machine. If the machine is connected to the wrong supply, the warranty is cancelled. How to Get Help If you have any questions or problems, refer to the problem solving section in this manual (see "Error Conditions, Problems and Solutions" on page 55). Contact your PowerSquare supplier for further help. Description of the PowerSquare Introduction The PowerSquare operates online with digital printers to process sets of printed pages into stitched books. The main parts are shown below. The PowerSquare can be fitted with a standard Stacker or with a Book Stacker. An optional SideTrimmer can be fitted. 2 Watkiss PowerSquare™224 User Manual