Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 109

Clean the Former Roller, When to do, Materials needed, Procedure, Check - toner

Get Konica Minolta bizhub PRESS 1250 PDF manuals and user guides View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

6 - Maintenance - Clean the Former Roller Clean the Former Roller When to do • When the message OPERATOR MAINTENANCE is displayed on the screen. • Clean the former roller if the spines of the books are dirty. Ink and toner can collect on the former roller. FIGURE 56. Dirty marks on the spine Materials needed Clean, plain paper that is not printed. A3 size (USA: 11 x 17") is recommended. 4mm thickness is needed for each cycle. More than one cycle can be needed. Procedure Step 1 2 3 4 5 6 Action Information Enter the correct settings on the touch screen. • Set the touch screen to the correct PAPER SIZE. • Set the SET THICKNESS to 4.0. • Set the number of STITCHES to 0. • Set the number of FORMS to 4. Touch START Open the connecting bridge cover. Lift the gathering area cover. Put 4mm of clean paper in the gathering area. Press the two orange buttons and hold for 9 seconds, or until you hear the folder operate. Check The book is delivered to the stacker. Check the book. Repeat the procedure until the book spine is clean. Watkiss PowerSquare™224 User Manual 105

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
6 - Maintenance - Clean the Former Roller
Watkiss PowerSquare™224 User Manual
105
Clean the Former Roller
When to do
•
When the message
OPERATOR MAINTENANCE
is displayed on the screen.
•
Clean the former roller if the spines of the books are dirty. Ink and toner can
collect on the former roller.
Materials needed
Clean, plain paper that is not printed. A3 size (USA: 11 x 17”) is recommended.
4mm thickness is needed for each cycle. More than one cycle can be needed.
Procedure
Check
The book is delivered to the stacker. Check the book. Repeat the procedure
until the book spine is clean.
FIGURE 56.
Dirty marks on the spine
Step
Action
Information
1
Enter the correct settings on the
touch screen.
•
Set the touch screen to the cor-
rect
PAPER SIZE.
•
Set the
SET THICKNESS
to
4.0
.
•
Set the number of
STITCHES
to
0
.
•
Set the number of
FORMS
to
4
.
2
Touch START
3
Open the connecting bridge cover.
4
Lift the gathering area cover.
5
Put 4mm of clean paper in the
gathering area.
6
Press the two orange buttons and
hold for 9 seconds, or until you
hear the folder operate.