Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 83
Remove Set - Gath, Remove Set
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference MOTOR CONTROLLER The drive motor controller is not NOT READY ready. If the problem continues, contact your service engineer. OPERATOR MAINTENANCE The machine needs routine main- See "Operator tenance by the operator. Maintenance" on page 103. REBOOT THE MACHINE Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. REMOVE SET FROM FOLD AREA Open the folder cover and remove See "Jam in the the set. Folder or Former Area" on page 86. REMOVE SET - GATH- Open the gathering area and ERING AREA remove the sheets. See "Jam in the Gathering Area" on page 85. REMOVE SET STITCH AREA Open the folder cover and remove See "Jam in the the set. Stitch Area" on page 86. Rotate axis moving The rotate axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. SHUTTLE MOTOR COMMS FAIL Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. SHUTTLE MOTOR ERROR Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. Sidelay axis moving The sidelay axis (size adjustment) is adjusting. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. Watkiss PowerSquare™224 User Manual 79