Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 78
Dfa Interface - No, Error - No Comms
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference COVER OPEN A safety cover is open. The machine will not operate until the cover is closed. DFA INTERFACE - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. DRIVE MOTOR STALL There is a paper jam. Check the machine and correct the error. See "Paper Jams" on page 84. Touch STOP to clear the message from the screen. Endlay axis moving The endlay axis (size adjustment) is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. ENDLAY - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. ERROR IN TRIM AREA There is an error at the trimmer. Check the trimmer for a paper or book jam. See "Jam in the Trim Area" on page 89. Touch STOP to clear the message from the screen. ERROR - No Comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. FLOW ERROR BRIDGE There is an error at the connecting bridge. Open the connecting bridge cover and check for a paper jam. See "Jam in the Connecting Bridge" on page 84. Touch STOP to clear the message from the screen. FLOW ERROR FORMER There is an error at the former. Open the folder cover and remove the book. If necessary, open the main deck to remove the book. See "Jam in the Folder or Former Area" on page 86. 74 Watkiss PowerSquare™224 User Manual